The Canon 430EX II is excellent for a flash Canon photography equipment to buy.
With built-in flash of the camera is not always a good option, considering the location of the camera's flash. The flash is usually small and very close to the axis, the results are very hard and often red-eye effect, is to fold result.
This means that an external flash is required. This brings us to the Canon line of sight. You can also flashes of third parties for use withCanon, but this is not recommended. The range of Canon flash units to cover everyone from beginners to professionals. 430EX II falls in the middle of the range and level of amateur advance, amateur and professional photographers focused.
The Canon 430EX II has a host of new features over its predecessor. Rapid recycling (20%) achieved an improved locking and unlocking mechanism, with a new metal foot design with redesigned connection pins.
The Canon 430EX II offers AF Assist Beamcoverage of up to 9 AF points can, in very dark situations of conflict or low concentration.
The 430EX has nine custom functions. The settings you need to slave the zoom button has been moved from the old switch.
The flash head can be tilted and rotated forward. This is great for fill-flash and bounced flash.
The 430EX is equipped with E-TTL II (Through The Lens electronic version II). This uses a pre-flash to measure the distance to the subject for the right amount of lightand adjusting the exposure. This measure also the color and set the correct white balance.
In manual mode, the 430 are the steps in increments of 1 / 3 stops to increase control. The settings of 430 can be used by the Canon EOS camera's menu.
In a system master and slave, the 430EX II can only act as a slave flash.
No comments:
Post a Comment